HARMONIC BALANCERS / VIBRATION DAMPENERS
|All rebuilt harmonic balancers are first disassembled and cleaned. The parts are then inspected balancers are then prepared for assembly. Timing marks are set to the factory specification by using a laser aligning process. After the timing marks are set, the harmonic balancers are then injected with a high-temperature, high-strength silicone rubber that is then platinum cured for a extremely strong hold. The new silicone rubber is capable of withstanding temperature in excess of 450 degrees, and will hold up against pressures as high as 770 psi. Rebuilt harmonic balancers carry a 3 year limited warranty.|
TANSON - SACRAMENTO, CA U.S.A - ( 916 ) 752-8790
9 a.m. - 5 p.m. Monday - Friday - Pacific Standard Time
Currently there is no auto checkout. Please CONTACT by phone or email.
|Vibration Dampers||Exhaust Header Flanges & stubs|
|CONTACT||Tansmission Conversions early Oldsmobile & Cadillac V8||1949, 1950 & 1951 88A Oldsmobile rubber||Oldsmobile Floor Boards||Two piece windshield to one piece trim fillers|
|Used Parts, Oldsmobile & Other||11/18|
OTHER MAKES AND MODELS AVAILABLE CALL WITH YOUR NEEDS
( OLD324 shown in pictures, not the 3 groove )
Please include the Make, Model, Year & Engine Size of your vehicle when looking for a price quote.
Customer might have to supply good or repairable core. Not all dampers are in stock due to availability.
|215||1961-63||Aluminum block #578-785||OLD2151||$235.55||core needed|
|324||1954-56||Single V belt||OLD324||$234.45||core needed|
|2 V belt||OLD3241||$251.00||core needed|
|3 V belt ( A/C )||OLD3242||$326.90||core needed|
|330||1964 only||I need to know if Low or High
compression engine. The width of the pie shaped piece on the rear of
damper will be:
Low compression is 3 1/2".
High compression is 2 1/2"
|350||1968-80||gas engine #398263X4||OLD455||$133.05||$30.00|
2" thick ring, 9"D, 22 lbs
|Call for availability & price|
|350||W 30 1" thick ring||$130.00||$30.00|
|350||W 30 1 1/4" thick ring||$140.00||$40.00|
|1957-60||3 V belt.||OLD3713||$280.05||core needed|
|394||1959-63||2 V belt||OLD3941||$252.05||core needed|
|1964-69||3 V belt||OLD3942||$252.05||core needed|
|1964||2 V belt||OLD3943||$252.05||core needed|
|425||64-5||330 Hi Comp||OLD4251||$155.05||$50.00|